Dormakaba TS 97 FL XEA, Mounting Instructions

Page: 1 / 4

EN
TS 97 FL XEA
WN 059870 45532/13715
2019-08
Mounting instructions
1 About this document
1.1 Contents and purpose
This manual describes the installation, startup,
maintenance and disassembly of the TS 97 FL XEA
door closer. The manual’s picture section is partly
supported by text in this section of the manual.
1.2 Target group
The hold-open system’s mounting, commissioning,
maintenance and disassembly must only be carried
out by qualified personnel that have been authorized
by dormakaba. The acceptance inspection must only
be carried out by qualified personnel certified for this
by dormakaba.
1.3 Other applicable documents
The following documents belong to the unit’s
complete documentation and must be observed:
• Drilling template
• Picture section for mounting instructions
• General design approval
• Information sheet about the use of hold-open
systems
1.4 Documents storage
This manual must be kept during the service life of the
product and must be passed on with the product.
1.5 Safety instructions
CAUTION
This signal word indicates a situation of
potential risk, which could lead to minor or
slight injury if not averted.
1.6 Symbols used
1. 2.
Step-by-step graphics
dormakaba Deutschland GmbH
Postfach 4009
58256 Ennepetal
19
0432-CPR-00026-58
EN 1154:1996/A1:2002/AC:2006
EN 1155: 1997/A1: 2002/AC:2006
3 8 3-6 1 1 4
DOP_0172
Contents
1 About this document 1
1.1 Contents and purpose 1
1.2 Target group 1
1.3 Other applicable documents 1
1.4 Documents storage 1
1.5 Safety instructions 1
1.6 Symbols used 1
1.6.1 Tool icons 1
2 Safety 1
2.1 Intended use 1
2.2 Prerequisites for the operation of hold-open
systems 2
2.3 Requirements for the electrical installation by the
customer 2
3 Product description 2
3.1 Technical data 2
3.2 Optional components 3
4 Mounting 3
4.1 Mounting variants 3
4.2 Mounting the door closer and slide rail 3
4.3 Mount lever arm 3
4.4 Adjust door closer 3
4.5 Mount the cladding 3
4.6 Set the doorstop 3
4.7 Function test 3
4.7.1 Freewheel function 3
4.7.2 Close door 3
5 Disassembly, recycling and disposal 3