7
TP/TA EASY Safe
2020-11
dormakaba mounting instructions
Mounting
WN 060028 45532
4
Mounting
CAUTION
Risk of injury from sharp edges.
Incorrect handling during mounting can
cause the glass
to break, resulting in injury.
• Read and follow the safety instructions in
this manual carefully.
• Wear personal protective equipment.
4.1 Cleaning the glass surfaces
CAUTION
Risk of injury from broken glass
Incorrect cleaning of the glass surfaces
can prevent the door hinges from gripping
the
glass surface, causing the glass to break.
• Clean glass surfaces around the clamping
plates carefully.
• Use commercial glass cleaner.
• Do not use thinners.
1.
Clean glass surfaces around the clamping plates
carefully.
2.
Wipe glass surfaces dry.
4.2 Mounting the door rail
CAUTION
Risk of injury from broken glass during
mounting.
Incorrect handling during mounting can
cause the glass
to break, resulting in injury.
• Secure the installation site.
• 2 persons required to carry out
installation.
• Wear protective clothing.
• Use glass suction cups.
• Place the glass door panel on wooden
blocks and ensure that it cannot fall.
CAUTION
Risk of crushing during mounting of the
glass door panel.
During mounting, there is a
risk of crushing injuries to the fingers by the
glass edges.
• Wear protective gloves.
• Use glass suction cups.
Note
When a lock module is configured, the door
rail has a pin, and the door rail and lock
module are pinned.
1.
Slide the bottom door rail onto the glass with
a distance of 5 mm. When a lock module is
configured, the pin must point toward the glass
door panel.
Fig. 5
5
Sliding the bottom door rail on
2.
Align the bottom door rail with a distance of 4.5
mm.
Fig. 6
4.5
4.5
Aligning the bottom door rail
3.
In the case of a free glass edge, align the bottom
door rail with a distance of 15 mm.
Fig. 7
4.5
15
Aligning the door rail in the case of free glass edge