Dormakaba TENSOR Double-Acting Hinge, Installation Instructions Manual, Page: 5 / 8

dormakaba TENSOR - Frame Mount Installation Instructions
TENSOR 01-2018 812002 5
Frame mount - disassemble
Frame mount - recessed mounting plate
3 Installation instructions -
frame
mount
3.1 Prep door frame, disassemble and prep hinge
3.2 Secure recessed mounting plate
3.2.1 Pre-insert wall fasteners into plate for later
securing (M8x16).
3.2.2 Secure recessed mounting plate to hinge.
•
Use included fasteners (M6x12).
• Tighten at 9 ft lbs [12Nm].
3.1.1 Measure and prepare door frame for recessed
mounting plates. Use dimensions above.
• Cut 3/16” [4] deep recess for mounting plate.
3.1.2 Disassemble hinges.
Gaskets
Gasket size reference chart
GH Glass height
GW Glass width
A Distance between each hinge, on center
B Distance from center of bottom hinge to
bottom of glass
3.1.3 Determine appropriate gasket size.
•
Use chart for reference.
3.1.4 Peel adhesive from back of hinge plates.
3.1.5 Adhere gaskets to inside of hinge plates.
M8x16
M6x12
Gasket
adhesive
Hinge
plate
Hinge
plate
Hex key size
TENSOR 4mm
Fig 2
Fig 3
Hex key size
TENSOR 5mm
Recessed
mounting
plate
Gasket size reference chart
Glass thickness 1/2” [12] 3/8” [10] 5/16” [8]
Gaskets 1/32” [1] 1/16” [2] 1/18” [3]
B + 9/32” [7]
A
2-9/16”
[65]
3-7/8”
[82]
1-1/2”
[38]