12-2020
dormakaba Canada Inc. RAC5 Lite Installation Guide – PK3736 | 9
3.1.7 Programming Device
NOTE:
Purchased separately.
Programming of the RAC5 Lite can only be done with the M-Unit.
3.1.8 Installation Hardware Bag
(O)
4x Philips wood screw, #8 x 1-1/4”
(P)
4x Nylon anchor, #6-10
(Q)
4x Concrete anchor, #7-9
(R)
1x Strain relief connector with locking nut
(S)
1x Strain relief bushing
(T)
2x Diode-rectifier
(U)
5x Steel flat washer #8
(V)
3x Crimp terminal B connector
3.1.9 Tools Required (not supplied)
•
Safety glasses
•
Electric drill
•
9/64” (3.5 mm) drill bit
•
7/32” (5.5 mm) drill bit
•
1/4” (6.5 mm) drill bit
•
3/8” (9.5 mm) drill bit
•
Philips screwdriver - #2
•
Slotted screwdriver – 3/32” tip width
•
Adjustable wrenches
•
Crimp tool – 18-22 AWG
•
Pliers
•
Wire cutter/stripper
•
Ambiance or System 6000 via the M-Unit
•
Hammer or rubber mallet
•
Awl or centre punch
IMPORTANT
