dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 53
1.
Software Application and the Keypad.
2.
The Keypad and lock(s) via Multiplexer or not.
3.
Key Fob and Keypad.
Types of information that will be encrypted include all combinations, configuration data, and firmware used to
update the lock and Keypad.
The authentication method is ISO/IEC9798-2 compliant with AES-128 encryption
of communications between the lock and keypad.
4.2 Initial Combination Handling
Manager and Standard Users are required to change their combination on the first use and after combination
reset. This requirement does not apply to the Master User.
Keypads with a Display will show options for the user to change their combination. If, via the display, the
authentication attempt was for opening a lock, the opening sequence will be aborted, and the change
combination activity will be the action until finished or aborted. The opening sequence would need to be
restarted.
Non-Display keypads will indicate an error and a # command can be used by the User to change their
combination. For more details, please refer to
(contains 701 model # commands) and
(contains 702 model # commands). The failed error will be 3 red LED flashes and 3 low beeps.
5 LA GARD Software
Note:
The LA GARD Software is not UL evaluated.
The LA GARD software is a multi-faceted client that manages Users, Schedules, and Systems to be used in
concert with LA GARD safe locks and Keypads. This section outlines certain software functions. Review the
software online help by pressing F1 within the client for information not outlined here. Also review the Software
Installation & Registration Guide (Document #7043.0221) for basic installation steps.
Important:
If attempting to connect hardware to the computer using a 700 Series USB Dongle, ensure you
have the proper drivers installed. See the Software Installation & Registration Guide (Document #7043.0221)
for details.
5.1 Adding a User with LA GARD Software
Follow these steps within the LA GARD Software client to add a user:
1.
From the LA GARD Software Main Menu, select Users.
2.
From the top-right of the screen, select the Create icon.
3.
Input the First, Middle (if needed) and Last Name into their respective fields. Press the enter key to
confirm each field.
4.
Repeat Steps 1 – 3 for any additional Users.
5.
From the LA GARD Software Main Menu, select System.
6.
Select the applicable System from the middle column.
7.
In the right column, select the Users tab.
