dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 64
Appendix C: LA GARD 700 Series Simple
Set-Up: 701 with 1 Manager/1 Standard
User/6 Digit Combination
Navigation Tips
•
Any key press wakes the system. The commands below are shown with the as the key press for waking the
system. When not needed, the lock will respond with a short red flash and low beep signaling that the lock is
ignoring RETURN and waiting for your # command.
•
# key during a command sequence will cancel the sequence
•
Start a new open command string by entering id and combination
•
Return Key generally submits the prior keystrokes
•
Successful # command will receive a response with
•
Failed # command will receive a response with
•
The light indicator will remain green during entry of a # command. This light will turn off when the command is canceled
or completed.
Initial Set Up Commands
(for 1 Manager/1 Standard User)
The commands below are shown with the as the key press for waking the system. When not needed the lock
will respond with a short red flash and low beep signaling that the lock is ignoring that key and waiting for your
# command.
Action
Command String
Result
Open the container using the Factory Default Open Code of 1. Keep the container open while performing these set up
commands
Step 1
Install with
Preconfigured
User
Add
Preconfigured
Manager:
#50
Change
Master
Combination:
#52
Install Lock:
#22
#50
#52 00 (ID) 12345678 (Combo)
00 (ID) _ _ _ _ _ _ _ _ (New 8 Digit Combo)
00 (ID) _ _ _ _ _ _ _ _ (New Combo)
[22] + [00] + [8 Digit Combo]
Keypad:
Lock:
Installed with Manager User
01 Enabled, Combination =
123456, Privileges: Users should
change the combination for first
use
Step 2
Add
Standard
User with
Open Only:
#50
Standard User
#50 00 (ID) _ _ _ _ _ _ _ _ (New Master
Combo) 02 (ID) 123456 (Combo) 2 1
Open Only Privilege
Keypad:
Lock:
New User with Open
Privileges. Users should change
the combination for first use
