background image

T91409_A

  

©2020 All rights reserved.

4/20

BEST is a trademark of dormakaba USA Inc.

Statement

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:

(1)    This device may not cause harmful interference, 
and
(2)   This device must accept any interference 
received, including interference that may cause 
undesired operation.

Statement 

This equipment has been tested and found to comply 
with the limits for Class B Digital Device, pursuant to
Part 15 of the FCC Rules.  These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation.  This 
equipment generates and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications.  However, 
there is no guarantee that interference will not occur 
in a particular installation.  If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, you can try to correct the 
interference by taking one or more of the following 
measures.

• 

Reorient or relocate the receiving antenna.

 Increase the separation between the equipment

   and receiver. 

 Connect the equipment into an outlet on a circuit                    

   different from that to which the receiver is             
   connected. 

 Consult the dealer or an experienced radio/TV   

    technician for help.

Statement

THIS DEVICE COMPLIES WITH INDUSTRY CANADA 
LICENCE-EXEMPT RSS STANDARD(S).
Operation is subject to the following two conditions:

 (1)   This device may not cause interference
and
(2)  This device must accept any interference, 

including any interference that may cause undesired 
operation of the device. 

This Class [B] digital apparatus meets all requirements 
of the Canadian Interference-Causing Equipment 
Regulations.

CET APPAREIL EST CONFORME À LA NORME RSS 
INDUSTRIE CANADA EXEMPT DE LICENCE.
Son fonctionnement est soumis aux deux conditions 
suivantes:

(1)   Cet appareil ne doit pas provoquer d’interférences
et
(2)  Cet appareil doit accepter toute interférence, y 
compris les interferences pouvant causer un mauvais 
fonctionnement du dispositif. 

Cet appareil numérique de la classe [B] respecte 
toutes les exigences du Réglement sur le matériel 
brouilleur du Canada.
                                  
            CAUTION: 

 

Before you handle the electronics                             

             board or any component connected to it, make 
sure that you are properly grounded using an electro- 
static discharge (ESD) protection kit!  Touching the 
board without proper grounding can damage sensitive 
electronics components—even if you don’t notice any 
static discharge!

     
             WARNING: 

 Changes or modifications not    

              expressly approved by dormakaba could
void the user’s authority to operate the equipment.

FCC/IC Certification

Summary of Contents for Best Switch Fob






Reviews: