Installation
Technical Manual
26
04046493 - 11/2018
dormakaba Remote Reader 91 15 -
U300
5.4
Device fixing
1.
Assemble a 35 mm DIN rail (EN 50022).
2.
Screw the earth terminal in place on the DIN rail.
Click
Push
1.
2.
1.
Without tilting it, attach the device to the bottom of the DIN rail, press up and keep
pressing it.
2.
At the same time, push the device up against the rail until it can be mounted on the rail.
Dismantling
NOTICE
Removing the device under voltage may cause damage.
Disconnect the device from the power supply before removing it.
Dismantling the Remote reader
Push
1.
2.
1.
Disconnect the device from the power supply.
2.
Disconnect the device Registration unit.
3.
Disconnect the device from the lines to the door.
4.
Push the device up and tilt out from the DIN rail at the top.
