DORMA USA, Inc.
Dorma Drive, Drawer AC
Toll-Free: 800-523-8483
E-mail: [email protected]
08279211 05/14
Reamstown, PA 17567
Fax:
800-274-9724
Subject to change without notice
TS93 PT/PTH
—
7
1
1.1
Snap both end covers (1) into place.
1.2
Remove the un-needed tab (2), and snap the closer body
cover (3) into place.
C. Installing the closer covers
Installing the covers
1.3
Attach with a 4-40 Phillips pan head screw (4) .
1.4
Snap the track cover (5) into place.
Adjusting the optional hold open
3.1
Slide the hold open mechanism (1) to the desired
location inside the track, to hold the door open to the
desired degree.
NOTE: Refer to section A, step #4 for hold open mechanism
location dependent upon hand of door.
3.2
Using an M2.5 hex key, tighten the set screw (2) to
secure the hold open mechanism.
3.3
To adjust the force of the hold open force, engage the
hold open feature by opening the door and allowing the
hold open slide shoe (3) to slide over top of the hold open
mechanism and click into place.
3.4
Inside the M8x15mm hex screw (4) is a 2.5mm set
screw. To adjust the hold open force, use an M2.5 hex
key and turn the set screw:
Clockwise = increase force
Counter clockwise = decrease force
3
1
3
4
2
2.5mm set screw
(inside the M8x15 hex screw)
2
5
4
3
1
3
1
