DORIC OTPG 4, User Manual

Page: 5 / 16

2.1 Channel Configuration
2.1.1 Channel Configuration Window Overview
1 2
3
4
Figure 2.2:
Channels Configuration Main Interface.
The Channels configuration window is used to configure each channel. The window can be accessed by using either
the Add channel or Edit buttons. This window is separated into multiple sections shown in Figure 2.2 that are defined
below.
1. The Channel Options section allows you to define the Channels Type and the Triggering Options. The different
fields of this section are explained in more detail in section 2.1.2 .
2. The Sequence Options defines the parameters of each pulse sequence for the channel. These parameters are
different for each Channel Code. Should a parameter chosen be impossible to apply to a sequence (For example,
a Time ON greater than 1/ Frequency ), the color of the option boxes will turn RED . The different fields for the
different Channel Mode are explained in more detail in section 2.1.3
3. The Sequence Preview section shows a visualization of the output sequence that will be generated by the
current configuration.
4. The Add button will save the current channel configuration and enables a new channel to be configured. The
Close button will close the window without saving the current channel configuration.
Chapter 2. Operations Guide
5