2
www.doric.com.au
Fitting Centre lock
3. With the top slave unit in the locked
position, attach the top rod.
4. Find and pull the bottom out through the
bottom cutout.
5.Fully insert centre lock into cut out.
Secure centre lock with two 12mm
countresink self tapping screws supplied.
6. Fully insert the slave locks and secure
with 12mm countersink self tapping
screws.
Assembling top and bottom locks to rods
2. Feed the top and bottom operating
rods fitted with the actuating bar through
the the top cut. Do not fully
insert slave locks into cutouts.
ABOVE THE CENTRE LINE
BELOW THE CENTRE LINE
Extrusion
Cut Outs
1. Preasemble and connect
the top and bottom operating
rods to the Actuator bar.
