English
Beep and LED Messages Explained
continued
Beep / Flash Sequence
What it means
What to do
During standard operation
LoHi – LoHI – LoHi – LoHi – LoHi – LoHi –LoHi – LoHi
Dorgard resetting ready
No action required
*--------*--------*--------*--------*--------*--------*--------*
for re-activation
Tone and flash sequence Is followed by the sound
of the motor driving
Error Modes
Lo – (2secs) – Lo – (2secs) – Lo – (2secs) – etc
Indicates battery lift is not
1) Screw down battery lift
*----------*----------*----------*----------*----------etc
screwed down properly
HiHiLo…………………
Possible fault with motor
1) Check ferrule is not worn
This pattern may repeat
or damaged. Replace if
* * *……………………
necessary
2) Release tension on fixing
screws and check Dorgard
is positioned flat against
door with no obstructions
3) Recycle or if necessary,
replace batteries
HiHiHiHiLoLoLoLo---(4secs)---
Indicates possible plunger
Same 3 points of action
HiHiHiHiLoLoLoLo---(4secs)---etc
movement fault
as above
HiLoLoLo---(4secs)---HiLoLoLo---(4secs)---etc
Indicates possible problem
Same 3 points of action
* * * * -------(4secs)--- * * * * -------(4secs)--- etc
with battery insertion
as above
HiLo-------(17mins)------HiLo------(17mins)------etc
Low battery mode or
Same 3 points of action
(Dorgard will repeat HiLo 8 times after 68mins)
miscellaneous error
as above
****--(4secs)-- ****--(4secs)-- ****--(4secs)-- etc
* LED flash
11
Fit&OpGuideINTERNATIONAL 23/7/04 2:20 pm Page 13
