Dorel Pacific Cycle KID Trax Semi-Truck & Trailer KT1565WM Owner'S Manual Download Page 7

12

13

NOTICE

•  The battery contains hazardous material that may cause 

serious injury or death if handled, connected, or charged 

improperly. Only an adult who has read and understands the 

warnings and instructions in this manual should handle, 

connect, or charge the battery. Always contact Pacific Cycle at 

1-877-741-6154 if you have any questions or concerns 

regarding handling, connecting, or charging the battery.

•  Charging the battery more than 24 hours could cause the 

battery to explode or ignite resulting in serious injury, death  

or property damage. Do not charge the battery for more than 

24 hours. Always disconnect the product from the charger  

after the battery is completely charged. Immediately  

disconnect the charger from the wall after the charger  

indicator light turns green.

•  A damaged supply cord, connector, or charger could cause 

burns to the skin, an electrical fire, serious injury, death, or 

property damage. Always inspect the supply cord, connector, 

and charger for damage. (e.g., frayed or kinked wires, exposed 

inner wires, missing insulation) before use. If damaged, do not 

use the supply cord, connector or charger for any purpose and 

properly dispose.

•  Connecting the battery and battery charger to an extension 

cord(s) could result in overheating, explosion, fire, serious 

injury, death, or property damage. Never charge the battery 

using an extension cord. Always plug the charger directly into  

a wall outlet. 

•  See additional battery and charging warnings on page 3.

•  The battery may become damaged if allowed to drain 

completely. Always keep the battery charged. 

•  The average time to charge the battery is 12 hours. Failure to 

follow the instructions regarding charging the battery may result 

in permanent damage to the battery and void the warranty.  

WARNING

Connect the battery charger

Use

Assembly: 

Make wire connections

Charge the battery

Follow the assembly steps in the order 

listed below.
 Attach the PB radio

• Insert the cord of the PB radio 

through the PB radio bracket

• Insert the end of the PB cord into 

the port under the PB bracket

  Connect the dashboard wires

• Connect the wires located under 

the dashboard

❸  Remove the seat

• Unlock the seat and lift off

  Disconnect the battery connectors to 

charge the battery (see next page).

 

 

 

 

Note: The product will not turn on while plugged into the 

charger.  Remove from charger prior to turning on.

  After charging is complete, re-connect the battery wires
   Replace the seat and lock it into place.

First charge

Regular charge

No more than

18 hours

12 hours

24 hours

Reviews: