• vvv
7
casper
highchair
assembly
Step 3: to attach the legs
• Join the lower leg (A) and upper leg (B)
together, making sure that the pin and
its hole are aligned.
• Push the pin down with your thumb to
slide into the slot (Figure 2a).
• Insert the upper end of each leg into a
retaining post (C) at bottom of the seat.
• With the pin aligned to the groove push
in all the way, then swivel until the
retaining pin pops out (Figure 2b).
• Repeat for other legs.
A
B
C
mother’s choice tip...
Ensure that each half leg is firmly
in place by twisting and pulling it
without pressing the pins.
2a
2b
