STEP 2
1: Attach the right arm assembly (FR) to back frame (B) with hex socket head bolt (1), spring
washer (3) and barrel nut (4). Insert the barrel nut (4) into the hole underneath the armrest
as per detail A. Insert the hex socket head bolt (1) through the hole in the back frame (B) as
per detail A. Use Allen Key (5) to tighten bolts.
2: Attach the right arm assembly (FR) to the base (A) with hex socket head bolts (2) and spring
washers (3). Use Allen key (5) to tighten bolts.
3: Repeat steps 1 and 2 to assemble left arm assembly (FL).
NOTE
: Do not fully tighten bolts until all bolts have been installed. Once all bolts have been
installed, fully tighten bolts installed in previous steps.
