background image

*

*

*

*

*

*

*

*

MAXIMUM WEIGHT CAPACITY: 165 LBS (75 KGS) PER LEVEL

*

*

*

*

*

*

*

USE ONLY COIL SPRING MATTRESSES ON BOTH THE UPPER AND LOWER BUNKS. 
FAILURE TO DO SO CAN RESULT IN INJURY.

ALWAYS USE THE RECOMMENDED SIZE MATTRESS OR MATTRESS SUPPORT, OR BOTH, 
TO HELP PREVENT THE  LIKELIHOOD OF ENTRAPMENT OR FALLS.

Montreal, Quebec

Canada, H1G 3L1

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact our customer service 
representative first!

CALL 1-800-295-1980 

You can also order parts by writing to the address listed below.  Please include the product model 
number, color and a detailed description of the part.

Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 100

E-MAIL: [email protected]

   WARNING

STRANGULATION HAZARD

 - NEVER ATTACH OR HANG ITEMS TO ANY PART OF THE 

BUNK BED THAT ARE NOT DESIGNED FOR USE WITH THE BED; FOR EXAMPLE, BUT NOT 
LIMITED TO  HOOKS, BELTS AND JUMP ROPES.
FOLLOW THE INFORMATION ON THE WARNINGS APPEARING ON THE UPPER BUNK END 
STRUCTURE AND ON THE CARTON. DO NOT REMOVE WARNING LABEL FROM BED.
THE MATTRESS PLATFORM IS DESIGNED TO SUPPORT A MATTRESS WITHOUT THE 
NEED FOR A POSTURE BOARD OR BOX SPRING.

USE ONLY MATTRESSES WHICH ARE  74"-75" LONG AND 37 1/2" - 38 1/2" WIDE ON UPPER 
AND ON LOWER BUNKS. ENSURE THICKNESS OF MATTRESS DOES NOT EXCEED 6". 
SURFACE OF MATTRESS MUST BE AT LEAST 5" (127MM) BELOW THE UPPER EDGE OF 
GUARDRAILS.
DO NOT ALLOW CHILDREN UNDER 6 YEARS OF AGE TO USE THE UPPER BUNK.

ALWAYS USE THE LADDER FOR ENTERING AND LEAVING THE UPPER BUNK.

THE USE OF WATER OR SLEEP FLOTATION MATTRESSES IS PROHIBITED.

ALWAYS USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER  BUNK. IF THE BUNK 
BED WILL BE PLACED NEXT TO THE WALL, THE GUARDRAIL THAT RUNS THE FULL 
LENGTH OF THE BED SHOULD BE PLACED AGAINST THE WALL TO PREVENT 
ENTRAPMENT BETWEEN THE BED AND WALL (APPLICABLE FOR BUNK BEDS WITH 
FULL LENGTH GUARDRAILS ON ONE SIDE).
PERIODICALLY CHECK AND ENSURE THAT THE GUARDRAIL, LADDER AND OTHER 
COMPONENTS ARE IN THEIR PROPER POSITION, FREE FROM DAMAGE, AND THAT ALL 
CONNECTORS ARE TIGHT.

DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE 
BED.
DO NOT USE SUBSTITUTE PARTS.  CONTACT CUSTOMER SERVICE FOR REPLACEMENT 
PARTS.
USE OF A NIGHT LIGHT MAY PROVIDE ADDED SAFETY PRECAUTION FOR A CHILD 
USING THE UPPER BUNK. 

Summary of Contents for 0 29986 59210 1



















Reviews: