3.
Position Locking Clip
It should be about 1 in. (2.5 cm) from
vehicle belt’s latch plate.
4.
Rebuckle Vehicle Belt
6.
Tighten Tether
With knee in child restraint, push
firmly on the back of the seat and
tighten tether strap.
1 in.
(2.5 cm)
5.
Check Belt Tightness
Hold child restraint at the belt path
with your weakest hand.
Push and pull from side to side.
If it moves more than 1 in. (2.5 cm),
try reinstalling the child restraint or try
another seating location.
33
2.
Attach Locking Clip
Thread both portions of the vehicle
belt onto the locking clip, as close to
the latch plate as possible.
Remove the locking clip when the seat belt is not being
used with a child restraint.
34
