6
GB
Act Push up –
Assembly and User Manual
Carefully read through the
complete assembly instruc-
tions and user manual, particu-
larly the safety instructions.
Failure to heed these safety instructions
may result in severe injury or damage to
the sun shade. Store the assembly in-
structions and user manual for future ref-
erence and always include them when
passing the sun shade on to third parties.
Your safety
Please observe the following
safety instructions. The manu-
facturer is not liable for damage
as the result of failure to comply.
Only use the sun shade with sufficient
ballasting (see “Technical data”).
Always place the sun shade on a firm and
level surface.
Use a stable support foot for the sun
shade.
The sun shade should only be erected by
a competent adult.
When opening and closing the sun
shade, please make sure to keep your
hands outside of the folding mechanism.
In the case of approaching wind or storm,
close the sun shade and secure with a
tie strap. Otherwise, it could be caught
by a gust and overturned and inflict dam-
age in the process or sustain damage as
a result.
Never ignite an open fire in the vicinity
of or underneath the sun shade. The sun
shade may catch fire or be damaged by
airborne sparks.
The sun shade is not a children’s toy.
Children could trap their fingers. Also, the
sun shade is heavy and could injure chil-
dren if it tips over.
Do not hang anything on the lateral brac-
es of the sun shade or even use them for
chin-ups.
The sun shade can protect your skin from
direct UV radiation, but not from reflected
UV rays. For this reason, please also use
a cosmetic sun block.
In order to protect the sun shade from ex-
cessive strain, close the sun shade in the
event of rain or snow and secure it with
a tie strap.
The cover is not suitable for machine
washing, dry cleaning or bleaching.
Do not use aggressive chemical clean-
ing agents or fluids, solvents, abrasive
substances or objects, bleaching agents,
high-pressure cleaners or strong clean-
ing products.
Please note the information on the care
label sewn into the sun shade.
Intended use
The sun shade is suitable for providing
protection against direct UV radiation. It is
not intended to provide protection against
rain or snow.
The sun shade is intended for domestic
use only. If used for commercial purpos-
es, the guarantee becomes void.
Setting up the shade
Use a sun shade base which is suita-
ble for the sun shade – observe the sun
shade base manufacturer’s specifica-
tions.
1. Place the sun shade base in the de-
sired location.
2. If you have not yet done so, screw the
shade tip onto the threading (see fig-
ure
A
).
3. Place the sun shade on the bottom
pole and tighten the knob
a
by turn-
ing it clockwise. Observe the insertion
depth of at least 10 cm in the process
(see figure
B
).
92220 i 20150830.indd 4
92220 i 20150830.indd 4
30.08.2016 13:51:21
30.08.2016 13:51:21