3510003
- 6 -
1. Turn the sound system on with the button [
POWER
] (3).
2. Select the music source (bLUE/FM/USB/AUH) by pressing the key [
INPUT
]
(3).
3. Adjust the volume of music and the microphone with the controller
VOLUME
(2) and the
microphone volume controller.
When using "bLUE" or ''AUH'' mode, adjust volume also in the Bluetooth device or external player.
Light effects:
The sound system is illuminated by multicoloured light effects. The type of light effects can be
changed in the display mode ʺb0xxʺ or through the submenu
Light
in the mobile app
Doping
Musick
.
Power Bank function
If it is necessary to charge the battery of the mobile device, connect the mobile device to the
USB port
OUTPUT 5V 1A
(8).
• It is not advisable to connect devices with high-capacity batteries to the USB port, for
example, a tablet or a powerful smartphone.
Mobile app
Doping Musick
To control the sound system from your mobile device, find and install the
app
Doping Musick
on it.
There are 7 icons in the app’s main menu:
1. ■ MUSIC LIST - playback of tracks in Bluetooth mode
2. ■ USB - playback of tracks from USB flash drive
3. ■ LIGHT - changing of light colour, brightness and rhythm
4. ■ FM RADIO - FM radio
5. ■ BLUETOOTH - Bluetooth connection control
6. ■ LINE - linear input activation/deactivation
7. ■ SOUND - music and microphone settings: equalizers, volume and
timbre controllers
Submenu
MIC DSP
- a highly diverse microphone sound processing
with a digital processor.
INSTRUCTIONS FOR CORRECT USE
This is a complicated device and must be handled with care. In order to provide long and reliable
operation of the sound system, please, comply with the instructions described below.
1 Do not put the sound system in a place with very high temperature (over 40˚C).
2 Prevent contact of the system with water or any other liquids.
3 Do not approximate the system with powerful sources of electric field and static electricity.
4 Do not open the housing arbitrarily, do not repair and re-build the sound system.
5 Do not insert non-standard, poor quality or damaged parts, accessories and batteries.
6 When bringing the sound system from cold into a warm room, do not switch it on, but let the
dewy parts dry for approximately two hours.
7 Protect from impacts, falls and powerful vibrations.
8 If the sound system is soaked, switch it off, wipe it down and let it dry for at least 24 hours.
CLEANING
Clean with soft, dry or lightly dampened cloth. Do not use solutions (gasoline, acetone, spirit etc.)
for cleaning. Do not abrasive or corroding cleaning agents.
EN
