33-523.2
- 5 -
INFO:
Use the mobile device's controls to select the piece and play mode and set the start
volume (see the mobile device’s user manual). Volume can be adjusted by the DOPING
volume regulator, [NEXT/VOL+] and [PREV/VOL-] keys or [VOL-] and [VOL+] buttons of
the remote control.
3. Re-Connecting via Bluetooth
a. Activate the Bluetooth feature on your mobile device.
b. Turn on DOPING and select the mode "bLUE".
c. If your mobile was paired only with DOPING, the connection will be established
automatically. If your mobile device was paired with a number of other devices, connecting
to DOPING must be carried out manually.
NOTES:
• Depending on the playback device manufacturer, re-registration may be required
(PAIRING).
• If you experience any problems connecting to the device, deactivate WiFi and mobile data
features on your device.
• Bluetooth compatibility cannot be guaranteed for devices (e.g. mobile phones), which will
be produced in the future.
• To ensure optimum connection, make sure your device's battery is fully charged.
• Some mobile devices have a power-saving mode. Deactivate the power-saving mode, as
it may cause problems in the transmission of data in the Bluetooth mode.
Reception of FM radio stations:
For stronger received transmitter signals, pull out the telescopic antenna.
1. If "FM" appears on the display, it means that the radio mode is turned on (if the symbol of
another mode appears on the display, by pressing the button [MODE] turn on the radio mode).
2.
Automatic search for radio stations (scanning) and their recording in the memory
2.1 Press and hold the button [PLAY/PAUSE] of the device (not remote), the signal
scanning and registration of radio frequencies will begin. The frequency will change on
the display and the number of memory cell of the found transmitter (for example, “P02”)
will appear for a short time and a short fragment of broadcast will be played. Release the
button [PLAY/PAUSE].
When tuning will be completed, broadcast of the first found radio station ("P01") will be
played.
2.2 Press the button [SCAN] on the remote, the signal scanning and registration of radio
frequencies will begin. The frequency will change on the display and the number of memory
cell of the found transmitter (for example, "P02") will appear for a short time and a short
fragment of broadcast will be played.
To stop scanning of FM radio stations, press the button [PLAY/PAUSE].
EN
