3510005
- 2 -
Control panel
PREPARATION (See component numbers on the picture)
Unpacking
- Take the device out of packing.
- Take off all the packing materials and bracings.
Charging the battery
- Add the cable plug found in the set to jack USB 5V (16), add the other cable USB plug to jack
of the computer or adapter, a red charging mode indicator will light up (15).
When indicator (15) turns off, battery is charged.
Charging adapter in USB output shall be 5V±10%. Charge the battery approximately 3 hours.
ATTENTION:
The voice notification indicates the need to charge the battery.
NOTE:
If the device is powered on at the time of charging, the time of charging is longer.
USING THE DEVICE
Switching on:
To turn the device on, set the main
OFF/ON
switch (17) to position
ON
.
Volume control:
By turning the button of volume regulator
VOL 1
(1) you can change the level of volume.
Playing MP3 files:
1. Insert USB flash containing MP3 recordings
USB
(14).
IMPORTANT:
For the proper functioning of the memory card, be sure to insert USB flash
drive before switching on the device by using the
OFF/ON
switch (17)
ON
. Do not insert or
remove the USB flash drive while the device is in operation. Inserting or removing a USB
flash drive while the device is in operation may cause loss of information and/or damage
the equipment!
2. Turn on the device by using
OFF/ON
switch. MP3 playback will begin.
EN
