Synchronization
option
Operator’s
Manual
Doosan reserves the right to change any of the above
Page 9 of 32
4. Display push-buttons and LEDs
Push-button functions
The display unit holds a number of push-button functions which are described below.
Shifts the display to show the alarm list.
Resets
horn
output
Tools.
Shifts the display to viewing of measured values. There are 20 different views.
Scroll through the views using the or button.
Shifts the display to show the event and alarm list. There are 4 lists to select
from: Event log, Alarm log, battery test log and engine interface alarm log (CAN
J1939 engine controller interface)
Parameter list selection
Moves the cursor left for manoeuvring in the menus.
Increases the value of the selected set point (in the setup menu). In the daily
use display, this button function is used for scrolling the displaying of generator
values.
Selects the entry in the display.
Decreases the value of the selected set point (in the setup menu). In the daily
use display, this button function is used for scrolling the displaying of generator
values.
Moves the cursor right for manoeuvring in the menus.
ESC
Jumps one step backwards in the menu (to previous display or to the entry
window).
START
Start of the gen-set
if ‘SEMI-AUTO’ or ‘MANUAL’ is selected
.
STOP
Stop of the gen-set
if ‘SEMI-AUTO’ or ‘MANUAL’ is selected
.
Manual activation of close breaker sequence
if ‘SEMI-AUTO’ or ‘MANUAL’ is
selected
.
Manual activation of open breaker sequence
if ‘SEMI-AUTO’ or ‘MANUAL’ is
selected
.
