OP000471
Inspection, Maintenance and Adjustment
4-12
10 HOUR / DAILY SERVICE
Grease Dozer, Boom Swing and Front
Attachment Pins (for first 100 hours)
Grease every 10 hours for first 100 hours and every 50
hours thereafter (See page 4-21).
NOTE:
If the unit has been running or working in water the
front attachment should be greased on a 10 hour /
daily basis.
Check Engine Oil Level
NOTE:
When checking level using a dipstick always remove
and wipe it clean before making final level check.
1.
Shut down engine and wait for fifteen minutes. This will
allow all oil to drain back to oil pan.
2.
Remove dipstick (1, Figure 12) and wipe the oil off
with a clean cloth.
3.
Insert dipstick fully in the oil gauge tube, then take it
out again.
FG000500
Figure 11
WARNING!
Do not remove the grease fitting until the pressure is
entirely bleed off by loosening grease fitting slowly to
avoid fatal wound.
Let anybody never be in the blowing direction.
Be careful to any kinds of works for nipples and
hydraulic line plugs.
2
1
FG007661
Figure 12
WARNING!
Allow the engine to cool before checking the oil level to
avoid burns by touching hot engine parts.
Summary of Contents for DX35Z
