DoorBird A1061 Series, Installation Manual

Page: 16 / 52

16 16
LEGAL NOTES
General remarks
1. DoorBird is a registered trademark of Bird
Home Automation GmbH.
2. Apple, the Apple logo, Mac, Mac OS,
Macintosh, iPad, Multi-Touch, iOS, iPhone
and iPod touch are trademarks of Apple Inc.
3. Google, Android and Google Play are
trademarks of Google, Inc.
4. The Bluetooth® word mark and logos are
registered trademarks of Bluetooth SIG, Inc.
5. All other company and product names may
be trademarks of the respective companies
with which they are associated.
6. We reserve the right to make changes to
our products in the interests of technical
advancement. The products shown may also
look different from the products supplied
based on ongoing enhancement.
7. Reproducing or using texts, illustrations and
photos from this instruction manual in any
media – even if only in the form of excerpts
– shall only be permitted with our express
written consent.
8. The design of this manual is subject to
copyright protection. We do not accept
any liability for any errors or any erroneous
content or printing errors (even in the case
of technical specifications or within graphics
and technical sketches).
9. Our products are in compliance with
all technical guidelines, electrical and
telecommunications regulations applicable
in Germany, the EU and the USA.
10. Our products and also the components
contained therein (ICs, software, etc.)
may only be used for civilian non-military
purposes.
Data privacy and data security
1. For maximum security, the device uses the
same encryption technologies as are used
in online banking. For your security, no port
forwarding or DynDNS is used either.
2. The data centre location for remote access
over the Internet by means of an App is
obligatory in the EU if the determined
Internet IP-Address location of the device is
within the EU. The data centre is operated
in line with the most stringent security
standards.
3. Video, audio and any other surveillance
methods can be regulated by laws that vary
from country to country. Check the laws in
your local region before installing and using
this device for surveillance purposes.
If the device is a door-, indoor station or camera:
• In many countries video and voice signal may
only be transmitted once a visitor has rung the
bell (data privacy, configurable in the App).
• Please carry out the mounting in such a
way that the detection range of the camera
limits the device exclusively to the immediate
entrance area.
• The device may come with a visitor history and
motion sensor. You can activate/deactivate
this function if required.
If necessary, indicate the presence of the device
in a suitable place and in a suitable form.
Please observe any relevant country-specific
statutory regulations concerning the use of
surveillance components and surveillance
cameras applicable at the installation site.
Check with the property owner and your house
community if you are allowed to install and use
this product. Bird Home Automation GmbH
cannot be held responsible for any miss-use or
miss-configuration of this product, including
the unauthorized opening of a door.
Bird Home Automation cannot be held
responsible for damages caused by improper
existing installations or improper installation.
Software and operating system’s updates
(so-called “firmware updates”) are generally
automatically installed on the products of
Bird Home Automation GmbH via Internet,
if technically possible. Automatic firmware
updates keep the products‘ software up to
date so that they always work reliably, safely
and efficiently. Through further development,
features can be added, extended or slightly
changed. Major changes or limitations to
existing features will generally occur if Bird
Home Automation GmbH deems it necessary
(e.g. for data protection, data security or
stability reasons, or to keep them up to date).
When a firmware update is available, Bird
Home Automation GmbH‘s servers generally
automatically distribute it to all compatible
products connected to the Internet or Bird
Home Automation GmbH‘s servers. This process
is gradual and can take several weeks. As soon
as a product receives a firmware update, the
system will be installed and will restart by itself.
Installed firmware updates cannot be undone.
Since the products and software of Bird Home
Automation GmbH are not explicitly customer-
specific products, a customer cannot deny an
automatic update if the product is connected
to the Internet or to the Bird Home Automation
GmbH’s server.