●
Convenient compact size
●
Buffer bypass
●
Two output channels with independent volume control
●
Polarity reverse toggle (OUT B) for output signal phase correction
●
LED indicator shows working state
●
Flexible design for a variety of scenarios
path
SEEKER
IN Jack:
1/4” mono audio jack, for connecting instruments or other pedals.
9V DC Jack:
For power supply, use a 9-volt DC regulated by AC adapter, 500mA (plug polarity is positive on the barrel and
negative in the center).
OUT A/B Jacks:
1/4” mono audio jacks, for connecting amps or other devices.
VOL A Knob:
Controls the output volume of channel A (OUT A).
VOL B Knob:
Controls the output volume of channel B (OUT B).
Footswitches:
Use the footswitches to select an output channel or engage both output channels.
This unit features two modes: A or B mode and A and B mode.
In A or B mode, either LED will lit up to indicate current working channel; in A and B mode, all LEDs will lit up to indicate that all
output channels are working.
A OR B Footswitch:
In A or B mode, tap the footswitch to toggle between A/B output channels.
A AND B Footswitch:
Tap the footswitch to engage/disengage A and B mode.
0°-180° Toggle:
Switch to 180° to invert the phase of channel B by 180° when necessary. When you split your signal to feed two
amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the phase will help. Switching to
0° to keep the signal neutral.
a
b
c
d
e
f
g
h
IN
OUT a
9V DC
path
SEEKER
OUT B
A
OR
B
A
and
b
180
0
VOL a
vol b
a
b
c
d
e
f
h
c
g
Connection & Controls
Overview
Features
Power Requirement: 9V DC center negative
Current Consumption: 5mA
Dimensions: 132x64x45mm
Weight: 23 g
5
Material: Aluminum alloy
Specifications
●
Easy Controls
The Path Seeker features an easy-to-use interface: Each output channel has an independent volume control for detailed signal mixing,
and LEDs under knobs indicate output channel working status.
●
2 Working Modes
This unit features two modes: A or B mode and A and B mode. You can select an output channel in A or B mode by tapping left
footswitch, or select both in A and B mode by tapping right footswitch.
●
Phase Correction
When you split your signal to two amps, sometimes it may cause phase cancellations, resulting a thin, hollow sound. If so, inverting the
phase will help. In this case, you can use the toggle to invert the phase of channel B by 180° when necessary.
●
Carefully Selected Components
The Path Seeker is designed and built with carefully selected components to ensure best sound quality and road performance. The
solid Aluminum-alloy chassis ensures touring reliability.
