9
4.5 Timer function
4.6 Full-Go mode
Set the timer under stand-by mode (stop any mode working), and set the current time (clock)
before using the timer function.
Set the current time (Clock)
Set the Timer
1.Press the “ ” button on remote control, the clock symbol display on screen.
2.Press“ ” “ ”button to select the hour or minute.
3.Press“ ” “ ”button to set the hour or minute.
4.After setting press the Clock button to confirm setting,
clock symbol off.
5.You can pres “ ” button to cancel the current setting.
1.Press the “ ” button on remote control, the timer symbol display on screen.
2.Press “ ” “ ”button to select the hour or minute.
3.Press “ ” “ ”button to set the hour or minute.
4.After setting press the Timer button to confirm setting,
timer symbol display on screen.
5.You can press “ ” button to cancel the current setting.
The unit will auto start auto cleaning after fully charge, and will return to charging base when
power low, and will operate after full charge and repeat again.
Setting the full-go function
1.Press the “ ” button on remote control
2.And press the “ ” button on remote control, the full-go
symbol display on screen, the full-go function activated.
3.You can press “ ” button to cancel the current setting.
4.Full-go function cannot work with Timer function, these two function need to separate to use.