background image

 

4.3. After service &Warranty 

This device is warranted for one year. 

  (Please check the certification for details) 
 
Federal Communication Commission Interference Statement 
 
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules.   
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and radiates radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one of the 
following measures: 

- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
- Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected. 
- Consult the dealer or an experienced radio/TV technician for help. 

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: 

z

 

This device may not cause harmful interference. 

z

 

This device must accept any interference received, including 
interference that may cause undesired operation. 

 
FCC Caution: Any changes or modifications not expressly approved by 
the party responsible for compliance could void the user's authority to 
operate this equipment. 
 
 

 

Summary of Contents for AX/16X











Reviews: