DongFeng EQ1040GLJ4-CMD1-D Manual Download

Page: 11 / 75

1.4 Safety Belt

Safety belt wearing (As show in picture)

Drawing the safety belt lock, pass the

should strap through shoulder, the belt

crosses the pelvis ,then press the lock into

the lock stand until hears “clicking” sound,

press down the red button on the lock

stand, the safety belt then will be unlocked. As show in picture:

Drawing the safety belt on the shoulder upward through the tongue, the shoulder slanting belt can

be adjust freely, the urgent locking mechanism of the safety

belt will suddenly stop or deadlocks during the impact.

Safety belt checking (As show in picture)

Regularly check the parts including braid, lock catch, lock,

rolling-up, fixed point and guide ring, replace the damaged

safety belt and the one cannot work appropriately.

Warning

Summary of Contents for EQ1040GLJ4-CMD1-D












































































Search results

Summary of Contents for EQ1040GLJ4-CMD1-D

Reviews:

Related manuals for EQ1040GLJ4-CMD1-D

Brands by name

Popular brands

DongFeng EQ1040GLJ4-CMD1-D, Manual

Search results

Summary of Contents for EQ1040GLJ4-CMD1-D

Reviews:

Related manuals for EQ1040GLJ4-CMD1-D

Brands by name

Popular brands