5
How to cup test
Put into cup barrel/Cup test method
1
Put the paper cups
into cup bucket.
• Put 5~10 cups each time into
the barrel for cup sensor to
operate moderately
2
Press the cup test
button.
• You can see the paper cup
comes out through the outlet
with beep sound
● Do not use substandard ,distorted, deformed or wet cups.
● Do not press the cups to put more cups into the barrel.
● May cause the cup sensor be out of order.
● Use the only 6.5Oz cups,(195ml
standard type)
● If the cups are not placed straightly
into the barrel, beat or tap with hand 2
or 3 times upward lightly
How to assemble barrels, and supply materials
1
Close the lid after putting the raw materials into the container
• When putting raw materials, incline the barrel slightly backward for the materials not to get
out of the front hole of the barrel.
2
Fix the fixing hole of barrel into the rotating shaft correctly.
• Before assembling containers, make sure that the names of the material shown in a plate
adhered to barrel with those of indicating panel.
Assemble barrels in order
•Tea2 barrel Tea1 barrel(From the left to the right)
3
Put the projecting part located in the lower part of barrel into panel
groove correctly.
Put the raw material funnel into the panel hole correctly.
● Put the raw material into the barrel after removing any moisture from the barrel for the
material not to be hardened due to any moisture.
How to clean the connection tubes
Cleaning the connection tubes
Press the cleaning button inside of the door.
•The coffee or tea material mixing barrel and the
connection tubes are cleaned with hot water.
2
1
Put the water gutter
back , after after remove
draining water.
Cleanning
mixing bowl barrel
Water gutter
Drink outlet
● Tea material mixing barrel No.1 cleaning
→ one time Press the cleaning button
● Tea material mixing barrel No.2 cleaning
→two times press the cleaning button for shortly time
● Tea material mixing barrel No.3 cleaning
→three times press the cleaning button for shortly time
● Tea material mixing barrel No.1,2, 3 in order
→one time Press the cleaning button for long time.
When using the machine for the first time or exception the connection tubes to be clogged due to the
hardened materials during operation, press the cleaning button, it will clean them automatically.
The cleaning function is only available during power is on.
6
