1. When using it for the first time, please take the headphone out of the charging box and tear off
the protective film. When putting the earphoneback in the charging compartment, the earphone
will start charging and shut down automatically. When the headset is taken out of the charging
compartment, the headset will automatically turn on.
2. If press and hold the multifunction for 2 seconds, the headset will turn on.
If press and hold the multifunction key for 3 seconds, it will turn off.
Waterproof Wireless Sports Headphones
Thank you very much for purchasing a Donerton product.
About the latest products, discount coupons, free items,
Please visit the following website:
https://motasttech.com/
If you need support,
You can also email us:[email protected]
Sketch map of the product
Sketch map of wearing
Wearing Steps
The Way to pair
Turn on and off
/Previous song
Volume-/Next song
Multi-function button
Charging contact
Headphone LED light
MFB ( Multi-function button)
Right Earphone
Left Earphone
Step 1: Open the
ear hang.
Step 1: Adjust the headset to
the correct and
comfortable position.
1.Press mfb (multi-function button) continuously for 2 seconds to turn on, then turn on
until the blue light can be seen.
2.The headset flashes red and blue alternately (pairing mode)
3.Turn on the settings of the phone/tablet --- Bluetooth --- turn on Bluetooth --- search
---Power Q20 Pro --- pairing / connection--- play music.
If put the headset in the charging compartment, it will automatically shut down and start charging.
If remove the headset,it will automatically turn on, and the reset is complete.
1.Put the headset in the charging compartment, it will automatically shut down and start charging.
If the charging compartment lights up green, the charging compartment is charging the headset.
2.When the headset is fully charged, the red light on the headset will go out.
1.Please use the mobile phone adapter to charge the charging compartment, you can also use the
computer USB cable or other USB interface charger for charging.
2.The green flashes to indicates that the charging compartment is being charged.
1.Take out the headset from the charging compartment, the headset will
automatically turn on.
2.Press any one of the multi-function buttons on the left and right sides for 2 seconds and
the power will automatically turn on, then you will hear a prompt tone for booting.
1.Put the headset in the charging compartment, the headset will turn off automatically.
2.Press any one of the multi-function buttons on the left and right sides for 4 seconds and
the power will automatically turn off, then you will hear a shutdown prompt tone.
If there is a calling, press any one of the multi-function buttons on the left and right,
the call is answering; press again, the call hangs up.
Press any one of the multifunction buttons on the left and right.
Long press for 2 seconds is the previous song, short press for volume "+"
Long press for 2 seconds is the next song, short press for volume "-"
In standby status, press any one of the left and right multi-function buttons for 2 seconds
to start the Siri voice assistant.
Double-click any one of the multi-function buttons on the left and right.
Pair with smartphones /tablets
How to reset?
Specification
About the mobile phone transmission distance as shown
Why is there no sound from the headset?
Or why is the concert disconnected?
What should I do if there is no sound in my left or right earphone?
Why does the headset turn off automatically?
Why can't charge the charging compartment?
Notices
Why can't I search for Bluetooth? Why can't I connect Bluetooth?
Waterproof specifications
On water
Under water
How to charge the headset?
Charge the charging compartment
The Operation of Multi-function Button
Turn On
Version
Support Bluetooth
Communication Distance
Frequency Band
Electrical Impedance
Standby Time
Calling Time
Music Playing Time
Headphone Battery Capacity
Charging Compartment Battery Capacity
Headphone Charging Time
Charging Time of Charging Compartment
Life waterproof (Sweating, raining, washing face, showering, etc.,
swimming in water, etc. Are expect)
*Please note that the Bluetooth signal of the mobile phone cannot be transmitted in water
V5.1
A2DP.AVRCP.HFP.HSP.EDR
≥10m
2.402GHz-2.480GHz
162Ω±15%
250 Hours
10 Hours
10 Hours
100mAh
950mAh
1 Hour
1-2 Hour
The Operation.
Turn Off
Reject
Answer/ Hang Up
Play Music/Stop
Previous Song/
Next Song/Volume -
Voice Assistant
The Function
The way to pair with computer/Laptop
Pair with echo do
Turn on the computer settings---devices-Bluetooth and other devices---turn on Bluetooth---add
Bluetooth or other devices---search for Bluetooth devices---Power Q20 Pro-pairing / connection
---play music.
Note: If the computer does not have Bluetooth, please insert the Bluetooth adapter. Download
the Bluetooth driver and then use it normally.
Open alexa app--settings--add new devices--Bluetooth--new pairing--search devices--Power
Q20 Pro--pairing / connection---play music.
1.Please do not disassemble/reassemble the product to avoid malfunction or fire.
2. Please avoid contact with corrosive liquids to avoid damaging the product.
3.Do not put it under extreme temperatures, such as below 10 degrees Celsius or above 60 degrees Celsius.
4.Keep away from children or pets.
5.Do not let the headset touch sharp objects, otherwise it will be scratched easily.
6.Please do not use the product in thunderstorm weather to avoid damage or electric shock.
7.If you do not use it for more than 1 month, please charge and maintain it regularly for safe operation.
8.Because the Bluetooth headset signal cannot be transmitted in water, swimming and diving will
cause the signal to be disconnected or interrupted.
Please check the mobile phone network is normally work, the network speed is not slow, and the music is being
loaded.Please check whether your phone is connected to two audio devices at the same time. Press and hold
the multifunction key twice to exit the connection.The distance of Bluetooth is 10m, please make sure there are
no obstacles. Besides, the phone needs to be close to the headset.If the surrounding environment is interfered
or the magnetic field is too strong, Bluetooth signal transmission will be affected.Open the interface of the phone's
Bluetooth, click on contact pairing, delete the pairing record, search for Bluetooth, and pair again.
You can restart the phone or reset the headset.
High-quality headphones, in order to extend the service life, please refer to the following instructions:
1.Please keep this product away from high temperature, high humidity and corrosive environment.
2.Please prevent this product from being hit, dropped, bent, soaked, etc.
3.Please do not disassemble the earphone or the charging stand.
4.Please do not allow this product to be overcharged all the time, this will reduce the service life.
5.If it causes any discomfort or pain, please stop using this product outright.
6.Please use a DC 5V-1A adapter certified by a regulated manufacturer.
Repeated charging and discharging the headset will cause the battery performance to decrease
over time,
which is normal for all rechargeable electronic products.
Reset the headset firstly, restart the phone, delete the connection history, search and then pair again.
If it still doesn’t work, follow these steps:
1.Take out two headphones from the charging compartment, press and hold the multifunction button for 4 seconds.
2.Press and hold the multifunction keys of the two headphones for 5 seconds until the red and blue lights flash
alternately and then release.
3.Double-click the multifunction key on the right ear, wait for 3-5 seconds, the headset will automatically connect.
When the blue light of the other headset flashes slowly, it means that the two headsets are successfully paired.
4.The red and blue lights of the other headset flash alternately, that means they enter the pairing state, and are
requesting pairing with the mobile phone.
5.Delete the connection record, check and then re-pair.
Make sure that the headset has enough power. In addition, the headset will automatically disconnect the Bluetooth
connection for 10 minutes, put the headset back into the charging compartment, press and hold the multi-function
key for 2 seconds to turn on the headset.
1. Make sure that the charging cable or mobile phone charger is in good condition and connected properly.
2. Poor contact is possible. Use your fingers to press the left and right earphones, and fully connect the charging
contacts of the left and right earphones to the charging case.
3. The charging contacts of the left and right earphones may be dirty, dusty or sweaty. When putting back the
charging case for charging, please wipe with alcohol or cloth.
4. Please wipe off the sweat and put it back in the charging box for charging, the indicator light will lights up.
5. If you hear "Battery Low", please charge the headset. When the LED display number of the charging box
reaches "10", please charge the charging box. Be careful not to exhaust the power in the headphones and
charging case,because that may shorten the life of the built-in lithium battery.
1.The distance of Bluetooth is 10m, please make sure there are no obstacles. Besides, the phone needs to
be close to the headset.
2.If any other mobile phone or device has been connected to the headset, please unpair it first.
3.Please restart the Bluetooth device and try to reset the headset.
The signal interrupted when the distance
is more than 10m.
The signal can reach normally when
the distance is less than 10m.
Package list:
1.Bluetooth headset*2
2.Charging stand*1
3.USB charging line*1
4.Additional ear caps*2
5.The manual*1
6. The cloth of wiping*1
Notice:
If you encounter any problems not listed above, please contact us by email,
we will reply within 24 hours.
Email:
Safety Prevention
闪电
编辑器
https://bianji.sdpdf.net/
a9ec9501-330aca8c-f95e69d9-6deaadb4