Donati GRL Series Manual Download Page 5

Page: 5 / 65

USE AND MAINTENANCE MANUAL FOR

JIB CRANE

GRL SERIES

1 PRELIMINARY INFORMATION

1.1 Manual contents and recipients

This technical publication, marked with the code

KMAN60MI00

, refers to the

“Jib crane, with

manual/electric rotation, “Column” type - GRL series.

DONATI SOLLEVAMENTI S.r.l.

Via Quasimodo, 17 - 20025 Legnano (MI)
Tel. +39 0331 14811 - Fax +39 0331 1481880
E-mail:

d[email protected]

www.donaticranes.com

It is related to their “intended use”, their functional technical specifications and performance and the relative
installation, use and maintenance instructions. It is addressed to:

•

the manager of the plant, garage or job site

•

operators assigned to transport, handling and installation

•

operators assigned to use of the jib crane

•

personnel assigned to maintenance

The manual must be kept by a person in charge of doing so, in a suitable place, so that it is always available

for consultation in the best possible conditions.

If it is lost or deteriorates, replacement documentation must be requested directly from the manufacturer,

quoting the code of this manual.

The manufacturer reserves the right to the material and intellectual property of this

publication and forbids its dissemination and duplication, including partial, without

prior written consent.

1.2 Symbols: meaning and use

Certain symbols are used in this manual to call the reader’s attention and underline some particularly
important aspects.

The following table shows the list and meaning of the symbols used in the manual.

SYMBOL

MEANING

EXPLANATION, RECOMMENDATIONS AND NOTES

Hazard

•

Indicates a hazard with the risk of an accident, including fatal.

•

The failure to comply with the instructions marked with this

symbol may result in a seriously hazardous situation for the
operator’s and/or exposed persons’ safety!

•

Carefully follow the instructions!

Warning

•

Represents a warning note of a possible deterioration of the

jib or a personal item of the operator.

•

Important warning to pay attention to.

Warning Note

•

Indicates a warning or a note on key functions or useful

information.

•

Visual
observation

•

Actions to
perform

•

A stylized eye may indicate to the operator that:

He/she needs to make a visual inspection.

He/she must proceed with the operating sequence.

A measurement value needs to be read, a warning needs to

be checked, etc.

Summary of Contents for GRL Series


































































Search results

Summary of Contents for GRL Series

Reviews:

Related manuals for GRL Series

Brands by name

Popular brands

Donati GRL Series, Manual

Search results

Summary of Contents for GRL Series

Reviews:

Related manuals for GRL Series

Brands by name

Popular brands