Installation, Operation and Maintenance manual
11
DFPRE 6L Dust Collectors
Figure 5: Removal lifting profiles
Fan box assembly
For collectors supplied with a fan box:
Refer also to figure 4.
The outlet position can be changed from the side to othe rear by swapping
the grill and cover before mounting the fan box.
1. Apply a continuous 5 mm bead of sealing compound to mounting surface of
collector, along each side of hole pattern.
2. Using a four-pount lifting arrangement, lift fan box into position and align bolt holes.
3. Bolt fan to the collector
Figure 6: Fan box assembly