Installation
Inspection
The RWB-2000 and RWB-3000 are normally
shipped by common carrier and should be careful-
ly inspected for damages that may occur en route.
Any damage should be noted and the carrier noti-
fied immediately.
Ship Loose Items
Items shipped loose with the Remote Weld Bench
may include:
l
Remote Weld Bench Installation and Operation
Manual, IOM 9421701.
Preinstallation
Note: See Specification Control Drawing for foot-
print dimensions, weights, and any other load
information.
The standard Remote Weld Bench is delivered
completely assembled. See the Specification
Control Drawing for footprint dimensions and
weights. The total weight of the unit should
include auxiliary equipment and other live loads.
Remove all crating, strapping, wrap and securing
hardware from both outside and/or inside the unit.
Check the parts received with the packing slips. If
parts are missing or damaged, notify the carrier
and your local Donaldson representative immedi-
ately.
The welding work surface is seven gauge hot rolled
steel. A waterborne, corrosion-resistant clear film
has been applied to the work surface. Remove this
film by washing the work surface with a detergent
cleaner and then drying with a cloth before weld-
ing.
Note: DO NOT weld without removing the corro-
sion-resistant film. Oily residue will be generated if
the film is not removed.
6
Donaldson Company, Inc.
Assembly of Standard Equipment (See Figure 1)
Each Remote Weld Bench is shipped fully assem-
bled from the factory. The RWB-2000 weighs
approximately 600-lbs. The forklift must be able
to safely lift the unit. The Remote Weld Bench
standard collar pack is factory installed in the back
of the unit. The collar pack can be relocated to
either side of the hopper by switching it with either
the maintenance access panel or the 3/4” NPT
sprinkler coupling panel. See Figure 1, Typical
Remote Weld Bench Installation.
Sprinkler Coupling
A 3/4” NPT pipe coupling is located on the right-
hand side of the hopper. It is used to attach a
sprinkler head if necessary. Check your local codes
for sprinkler requirements. See Figure 1, Typical
Remote Weld Bench Installation.
Note: Donaldson equipment does not include fire
prevention equipment, all sprinkler heads must be
supplied by others.
CAUTION!
Use care in selecting the installation
location for dust collection equipment
and follow all appropriate national and
local fire codes.
