11.
TROUBLESHOOTING
11.1. Problem-Cause-Solution Table
Problem
Cause
Solution
The dryer does not
start up
Time at 0:
Select a correct time.
Door open
Close the door.
Filter open
Close filter.
No power supply
Check the condition of fuses.
Check mains voltage is correct.
The dryer does not
heat up
Timer is in Cool-down mode Normal operation of the machine. To
return to heating, increase the time.
The heating does not receive
ON signal
Check thermostat / Control electronic
plate.
Check safety thermostat (1).
GAS alarm
Reset alarm (2).
The dryer does not dry
enough
Cycle time insufficient
Increase cycle time.
Insufficient air flow
Clean the fluff filter.
Check that the output pipe is clean and
not blocked.
Clean fan-extractor blades.
Outlet conduit too long.
Check that the room has sufficient fresh
air inlets.
(1) To reset the safety thermostat, remove the black plastic button and press the button on the back of
the machine, and cover again. If the problem occurs again, contact our After Sales service.
(2) To reset the gas alarm, press the black button on the back of the machine. For TOUCH machines,
the warning appears on the screen. If the problem occurs again, contact our After Sales service.
In any other case, please contact our After Sales service.
12.
INDICATIONS FOR REMOVING AND GETTING RID OF THE
MACHINE
Only European Union.
This machine is marked with the symbol that appears below.
This symbol means that in accordance with current European guidelines, the machine
(or any of its parts) must be taken to a specific collection point for electrical and electronic equipment,
and not to normal domestic waste containers.
44
