has been used up. Pump will be hot, and when temperature of pump being
heated up exceeds its’ Max limit, overheat protection will automatically activate
to protect pump being damaged. At this moment, steam delivery indicator light
will turn off, please turn power switch on base unit off at first ,and then check if
water tank has sufficient water or water tank has been well assembled. If not,
please refill water tank and re-assemble water tank well into base unit. 30
minutes later, it will re-work again.
Replacement of Filter
Follow below procedure to replace the filter:
i. Slide out the water tank from the base,(See Fig.7) and then take out the
filter from the water tank. (See Fig.8)
ii. Replace it with a new one.
iii. Re-install it into the water tank. (See Fig.9)
iv. Fill water into water tank up to MAX fill level,(See Fig.10)and slide water
tank into the power base again. (See Fig.11)
Anti-Scale system
1.
Filter is designed to reduce the build-up of limescale which occurs during
steam ironing, this will prolong the working life of your iron. However,
please note that the filter will not completely stop the natural process of
limescale build-up.
Fig.7
Fig.8
Fig.9
Fig.10
MAX
Fig.11
Click
