Page 4
INSTRUCTIONS FOR USE
The Steamer is designed to thoroughly clean floor surfaces, such as marble,
ceramic, stone, linoleum, sealed hard wood floors and sealed laminate
flooring.
WARNING:
ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE
WAX MAY BE REMOVED BY THE HEAT AND STEAM ACTION. DO NOT USE ON
UNSEALED WOOD FLOORS OR LET UNIT STAND ON ANY WOOD FLOOR FOR
AN EXTENDED PERIOD OF TIME. THIS COULD CAUSE THE WOOD GRAIN TO
RISE. IT IS THEREFORE RECOMMENDED THAT A SAMPLE CLEANSING BE
CARRIED OUT ON AN ISOLATED AREA OF THE FLOOR. IT IS ALSO
RECOMMENDED THAT YOU CHECK THE USE AND CARE INSTRUCTIONS OF
THE SURFACE FROM THE FLOOR MANUFACTURER TO ENSURE SUITABILITY
TO STEAM CLEANING.
For first time use of the machine, please hold onto the switch to allow the water
to get pumped to the steam chamber. The pump will make a louder noise during
this initial operation.
HOW TO ASSEMBLE AND USE
1)
Attach steamer head to steamer body.
2)
Secure steamer head with the small Philips Head Screw until is fully
tightened.
3)
Insert steamer handle down into the steamer body.
4)
Screw the Large Philips Head screw through the opening at the back of
steamer body into the rear of the steamer handle and tighten until secure.
5)
Place the steamer head in Cloth Pad, and secure the Pad by pulling the
cord while pressing on Toggle.
