71
DO937DV
www.domo-elektro.be
SK
5.
Povoľte závesný kolík pántu, vyberte otočte a kolík opäť dotiahnite.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
6.
Upevnite spodný pánt aj nožičku na druhú stranu (tam kam chcete umiestniť dvere). Použite skrutky,
ktoré ste.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
7.
Na spodnej pánt nasaďte späť dvere. Dvere musia byť vodorovne, aby ich tesnenie priliehalo po
celom obvode. Ak dvere dobre tesní, môžete usadiť aj horný pánt a priskrutkovať ho.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
8.
Na záver položte späť horný kryt prístroja a priskrutkujte ho.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet.
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
Unscrew
Screw
8
Reverse Door
9. Fix the thermostat knob.
screw
PREMIESTŇOVANIE MRAZNIČKA
· Ak sa chladničky z akéhokoľvek dôvodu vypla, tak pred jej opätovným zapnutím počkajte aspoň 10
min. Tento čas napomôže k tomu, aby sa vyrovnali tlaku vo vnútri chladiaceho systému.
· Mraznička vypnite a vypojte z el. siete. Odstráňte všetko jedlo a nápoje. Z chladničky vyberte aj všetky
police a pohyblivé časti. Alebo je tiež môžete nejako pripevniť, aby pri manipulácii s chladničkou
nespôsobili škodu.
· Mraznička premiestnite a nechajte aspoň 10 minút v kľude stáť pred jej spustením.
