![background image](http://html1.mh-extra.com/html/domo/do9134wk/do9134wk_instruction-booklet_2519902038.webp)
DO9134WK
38
→
Make sure that the on/off switch is clear of obstructions and that the
lid is firmly closed. The water kettle will not switch off automatically
if the switch is hindered or if the lid is still open.
9. Remove the kettle from the base and pour out the water.
→
Be careful when pouring the water since it is possible to burn
yourself on the boiling water or the hot steam. Do not open the lid
when the water in the water kettle is hot.
10. The water kettle will not start boiling again until the switch is pressed down
again. Let the appliance cool down for 15 to 20 seconds before reopening the
water kettle to boil water.
• The water kettle can remain on its base when the appliance is not being used.
• Make sure that the water kettle does not receive any power when it is not being
used, so always unplug the appliance when not in use.
• If by accident you would use the kettle without water in it, the boil dry protection
will automatically switch off the appliance. If this happens, let the water kettle
cool down completely before filling the kettle with cold water to start the boiling
process.
CLEANING AND MAINTENANCE
Always unplug the appliance before cleaning it.
Never immerse the water kettle or the cord in water. Also make sure that they do not
come into contact with moisture.
Wipe the outside of the kettle clean with a damp cloth. Never use any chemical,
abrasive or scouring cleaning products.
Also regularly clean the removable filter.
Descaling
Tap water may cause scale on the inside of the water kettle. Use a liquid descaler or a
non-toxic cleaning product to remove this build-up.
An alternate solution could be the following:
1. Fill the water kettle with 3 cups of white vinegar and add water until the kettle is
full (max. level). Let this soak overnight.
However, do not boil this liquid!
2. Afterwards, pour away the solution. Stains that remain in the spout can be
removed by rubbing it with a damp cloth.
3. Fill the kettle with clean water, boil and pour away the water.
4. Repeat once more and the water kettle is again ready for use.