![background image](http://html1.mh-extra.com/html/domo/do23101/do23101_instruction-booklet_2519924045.webp)
45
DO23101
www.domo-elektro.be
EN
A7 - Drinks
120 ml
1
240 ml
2
360 ml
3
A8 - Popcorn
50 g
50
100 g
100
DUO SETTING (STAGE COOKING)
You can have 2 settings follow each other. If defrosting is one of the two settings, always make sure that
defrosting is the first setting.
!
Attention: the automatic cooking programs and the timer cannot be used for this duo setting.
Set the first of the two settings as described earlier in this manual, but do not press start yet. Then set
the second setting and press the start button. In the example below, the appliance will first defrost for 5
minutes and then microwave at 80% power for 7 minutes.
1.
Press the knob to set the defrost mode. ‘d02’ appears on the display.
2.
Turn the knob until 5 minutes appears on the display.
3.
Press the microwave button to select the desired power setting. Press the button repeatedly to
adjust the power or turn the knob until P80 appears on the display.
4.
Press the start button to confirm the desired setting.
5.
Turn the knob until 7 minutes appears on the display.
6.
Press start to activate the selected settings.
You will hear a signal between the two settings.
CHILDPROOFING
The childproof lock automatically blocks the buttons for safety’s sake.
1.
Press the stop button for 3 seconds to lock the panel. The appliance will emit a sound.
2.
You can see the clock or “00:00” on the display.
3.
Press the stop button for 3 seconds to unlock the panel. The appliance will emit a sound.
NOTES
· If the door is opened while the appliance is operating, it will not continue automatically once the door
is closed. To do so, press the start button.
· After setting a mode, press the start button within 1 minute. If you do not do this, the settings will be
lost and the clock will be displayed.
· When the appliance is operating, you can check the selected mode and power. Press the mode knob.
The selected setting is shown on the display for a few seconds.
· When the appliance is operating, you can check the current time. Press the ‘set clock’ button. The
current time is shown on the display for a few seconds.
· Press the stop button to switch off the appliance if your preparation is finished before the time has
elapsed.