Revision: 1.0
Sapphire-BTX Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 3-4
3. Connections, Controls, and Indicators
3.1 Introduction
This chapter will help identify all the connections and interfaces of the product needed to install,
control, and monitor the device.
3.2 Bottom Panel
Note
: See
Section 3.6
No.
Item
Connection
1
RJ45 jack
Gigabit Ethernet connection for web user interface control
and IP streaming.
2
Hirose 6-way (male)
9-36VDC input. Connect supplied CAB0035 BTX power
cable to a nominal 12V supply.
3
Hirose 6-way (female)
CAB008 can connect here to provide a stereo analogue
audio input.
4
BNC socket (75
Ω
)
SDI video input.
Supports 12G-SDI, 6G-SDI, or 3G-SDI video formats.
5
Video input LED
Dual colour LED:
Red
– no video lock
Green
– video lock
6
BNC socket (75
Ω
)
ASI video output.