Domino Gx-OEM, Product Manual

Page: 158 / 198

14. Use the settings in the edit menu to define the element's visual appearance.
15. Select the
Save icon to save the change.
End of procedure.
Example of Barcode/MRC with Multiple Linked Elements
Multiple variable text elements can be linked to a barcode/MRC (Machine Readable Code).
When the variable text elements are updated, the content of the barcode/MRC will also be
updated. The variable text elements can be updated with data from the Variable text settings
screen , or from a communication protocol such as Dynamark.
When using Dynamark to update variable data, the BufferData command will print the data once
and then delete it. The SETTEXT command will cause data to remain until it is replaced with
additional data.
When using Dynamark, variables can also be linked with MRCs in the same way as the Domino
G-Series by using "#". If an MRC needs to be linked to a variable text element, the data can be
sent to the MRC via the SETTEXT command to link a variable.
For example:
If there are two elements in the label:
• MRC = MRC_Name.
• Variable Text = vText_Name.
Sending the command below will link data in the MRC to the variable:
SETTEXT "MRC_Name" "#vText_Name#"
The procedure below illustrates an example of a label containing four variable text elements
linked to an MRC.
OPERATION
153 EPT053091 - Issue 5 - 07 May 2021