8
1. Manual Ignition with "Piezo igniter"
1. Open the valve of the gas cylinder.
2. Open the shut-off valve to the gas supply.
2. Manual Ignition with "battery igniter"
7. Release igniter button (C). Keep rotary switch (B) depressed for another 10-15
seconds, then release.
8. Check the flame indicator to see whether a flame is burning.
9. Repeat the entire process if the flame has gone out.
10. Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.
Temperature setting cooling compartment
As shown, you are able to regulate the temperature of
the cooling compartment, if necessary, by turning
rotary knob (B)
The cooling unit’s performance is influenced by ambient temperatures.
At ambient temperatures of +15°C up to +25°C, set the knob B to the
middle position. The cooling unit works with optimal performance.
5.2.4
T
TIIP
P
3. Set energy
selector switch
(A) to
4. Press and hold
rotary switch (B)
5. Activate Piezo
ignition (C)
several times at
intervals 1-2
seconds.
A
B
C
B
middle position
6. Check the inspection glass to
see whether there is a flame
(the inspection glass is insi-
de the refrigerator at the
bottom left).
3. Set energy
selector switch
(A)to
4. Press and hold
rotary switch (B)
5. Activate ignition
by pressing the
button (C) and
keep it depressed.
B
C
6. Once the flame has been ignited
and is burning, the needle of the
galvanometer passes over into the
green section.
