background image

3

TRIM LINE SCREEN ROOM

TRIM LINE SCREEN ROOM

INSTALLATION

APPLICATION:

The A&E Trim Line Screen Room is available in sizes to
correspond with the various sizes of Trim Line Awnings.

TOOLS REQUIRED FOR INSTALLATION:

Pencil

1/8 Drill Bit

Measuring Tape

Center Punch

Phillips Screwdriver

Hammer/Mallet

Drill

(for Hook Stakes)

IMPORTANT: Read the entire installation procedure
before starting the installation.

The Dometic Corporation reserves the right to modify appear-
ances and specifications without notice.

INSTALLATION

During installation, care must be taken not to scrape and
damage the panel and skirt.

1. In order to correctly match the Screen Room to the right

size Trim Line Awning, you must know the length of the
awning
. See FIG. 1A.

The A&E Trim Line Screen Room consists of (1) continu-
ous panel for the front, sides and rear skirt.

The above-mentioned panel and skirt are secured to the
vehicle, the awning and to the ground by means of hook
and loop fasteners, twist fasteners and hook stakes
(provided). See FIG. 1C.
NOTE: The inner and outer sides of all panels can be
checked by looking at the hook and loop fastener
strips. The fastener strip on the front is on the
outside.

2. Set up awning for installation of Trim Line Screen Room.

To facilitate accurate installation, vehicle should be
parked on reasonably flat ground.

Open awning and install front support and side rafter pole
as shown in FIG. 2

FIG. 1A

SELECTING THE

CORRECT SIZE

LENGTH

(AWNING SIZE)

FIG. 1B

FIG. 1C

FASTENER

STAKE

VEHICLE
SKIRTING

FRONT & SIDE
PANELS ARE ONE PIECE

SIDE OF
VEHICLE

FRONT
SUPPORT

SIDE RAFTER POLE

AWNING FABRIC

SIDE VIEW

FIG. 2

FIG. 3

Hook & Loop
Fastener Sewn on Top
of Awning Fabric
and Under Valance

3. After awning is set up, remove screen room from storage

bag and line up in position with awning as shown in FIG.
3.

4. Fasten front of screen room to front by joining hook & loop

fasteners together under valance. Pull side  panels  over
rafters and join to fabric on top of awning on both sides.

5. When attaching screen room to awning at bag, pull bag

away from awning and bunch bag so that screen room is
securely attached to awning fabric inside of bag.

Reviews: