background image

1

INSTALLATION & OPERATING

INSTRUCTIONS

MODELS

944X07.00(X)
944X08.00(X)
944X09.00(X)
944X10.00(X)

944X11.00(X)

944X12.00(X)
944X13.00(X)

A&E TRIM LINE AWNING

TM

®

USA
SERVICE OFFICE
Dometic Corporation
509 South Poplar Street
LaGrange, IN 46761
260-463-4858

CANADA
Dometic Distribution
866 Langs Drive
Cambridge, Ontario
CANADA N3H 2N7
519-653-4390

For Service Center
Assistance Call:
800-544-4881

REVISION:

Form No. 3308723.018  8/04
(Replaces 3308723.000)
(French 3309146.011)
©2004 Dometic Corporation
LaGrange, IN  46761

This manual must be read and un-
derstood before installation, ad-
justment, service, or maintenance
is performed. This unit must be in-
stalled by a qualified service tech-
nician. Modification of this product
can be extremely hazardous and
could result in personal injury or
property damage.

Lire et comprendre ce manuel avant de
procéder à l'installation, à des réglages,
de l'entretien ou des réparations.
L'installation de cet appareil doit être
effectuée par un réparateur qualifié.
Toute modification de cet appareil peut
être extrêmement dangereuse et
entraîner des blessures ou dommages
matériels.

RECORD THIS UNIT INFORMATION FOR
FUTURE REFERENCE:
Model Number
Serial Number
Date Purchased

Important:

 These Instructions

must stay with unit.
Owner read carefully.

Summary of Contents for TRIM LINE 944-07.00 Series

Page 1: ...nd un derstood before installation ad justment service or maintenance is performed This unit must be in stalled by a qualified service tech nician Modification of this product can be extremely hazardous and could result in personal injury or property damage Lire et comprendre ce manuel avant de procéderàl installation àdesréglages de l entretien ou des réparations L installation de cet appareil do...

Page 2: ...op erating instructions UNDERSTAND SIGNAL WORDS Asignal word WARNING OR CAUTION is used with the safety alert symbol They give the level of risk for potential injury indicates a potentially hazard ous situation which if not avoided could result in death or serious injury indicates a potentially hazard ous situation which if not avoided may result in minor or moderate injury used without the safety...

Page 3: ...ckets with 8 x 3 4 sheet metal screws at each end of awning directly under awning rail Make sure large groove on socket faces down Align socket directly under Hook Loop Fastener tape or zipper depending on model See Fig 5 4 Install bottom pair of sockets with 8 x 3 4 sheet metalscrewsateachendofawning belowcampertop whencamperisinopenposition approx between49 to 52 below awning rail Large groove o...

Page 4: ...nbeplaceduprightincarportposition or they can be inserted into sockets previously installed on camper up against camper for a patio position awning Galvanized steel tent stakes and wire loops for tent stakes are provided to position ground polesuprightandholdthemintheground See Fig 7 Use spare sockets provided to attach to end ballsongroundpolestoprotectendballwhenstaking poles to ground Drive sta...

Reviews: