EN
Target group for this manual
CoolAir SP950C
6
4
Target group for this manual
The installation information in this manual is only intended for qualified personnel at
workshops, who are familiar with the guidelines and safety precautions to be applied
during the installation of vehicle accessory parts.
5
Intended use
The fastening rail is used for installing the SP950C condenser unit for the CoolAir
SP 950 parking cooler to the following vehicles: Renault Trucks T. The fastening
frame is attached on the left of the rear cab wall.
When fastening the fastening frame, use existing fastening points on the vehicle. You
do not need to drill new holes.
6
Fitting the fastening frame
A
I
Basic assembly is described in fig.
1
, page 2:
NOTICE!
Observe the information in the installation manual when fitting the
CoolAir SP950 parking cooler.
NOTE
Operating instructions can be found in the operating manual for the
CoolAir SP950 parking cooler.
Item
Designation
1
Fastening frame
2
Condenser unit
3
Cover
SP950C-Renault-Trucks-T--I-16s.book Seite 6 Freitag, 24. Februar 2017 5:20 17