Dometic SeaXChange XTC Series, User Manual & Installation Manual

Page: 38 / 130

36
0(0%5$1(5(029$/ 5(3/$&(0(17
5HSODFLQJPHPEUDQHVLQWKHSUHVVXUHYHVVHOVLVDQHDV\SURFHVVLI\RXKDYHWKHSURSHULQIRU
PDWLRQDQGWRROVDWKDQG3OHDVHUHIHUWRWKHIROORZLQJLQVWUXFWLRQVZKHQUHPRYLQJDQGUHSODFLQJ
PHPEUDQHHOHPHQWV
WARNING: ALL PRESSURE GAUGES MUST READ ZERO BEFORE PROCEEDING.
BEFORE ATTEMPTING, DISCONNECT THE POWER FROM THE SYSTEM AND
BLEED ALL WATER PRESSURE FROM THE SYSTEM.
5HPRYHWKHHQGSOXJVIURPWKHVLGHRIWKHSUHVVXUHYHVVHOV7KLVLVGRQHE\UHPRYLQJWKHIRXU
´QXWVDQGZDVKHUV7KHHQGSOXJVVKRXOGWKHQIUHHO\VOLGHRXWRIWKHSUHVVXUHYHVVHO
2. Remove the replacement membrane element(s) from the shipping box; the membrane(s) should be
contained within a plastic oxygen barrier bag.
NOTE: WEAR GLOVES FOR THE FOLLOWING STEPS IN ORDER NOT TO CONTAMINATE THE
MEMBRANE.
3. Cut the bag open as close as possible to the seal at one end of the bag, so the bag may be re-used if
necessary.
4. Make sure that all parts are clean and free from dirt. Examine the brine seal, and permeate tube for
nicks or cuts. Replace the O-rings or brine seal if damaged.
Remove