EN
Troubleshooting
CoolFun SC26, SCT26, SC30, SC 38
16
9
Troubleshooting
10
Disposal
➤
Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
Problem
Possible cause
Suggested remedy
Your device is not work-
ing (plug is inserted).
There is no voltage
flowing in the DC socket
in your vehicle.
The ignition must be switched on in
most vehicles to apply current to the
DC socket.
No voltage present in
the AC voltage socket.
Try using another plug socket.
The inner fan or the
cooling element is
defective.
This can only be repaired by an
authorised repair centre.
When operating from
the DC socket:
The ignition is on and the
cooler is not working.
The fuse of the DC plug
is dirty. This results in a
poor electrical contact.
If the plug of your cooler becomes
very warm in the DC socket fitting,
either the fitting must be cleaned or
the plug has not been assembled
correctly.
The fuse of the DC plug
has blown.
Replace the fuse (fig.
6
1, page 5)
of the DC plug with one of the same
rating.
The vehicle fuse has
blown.
Replace the vehicle's DC socket fuse
(usually 15 A). Please refer to the
operating manual of your vehicle.
SC26-SCT26-SC30-SC38--O-16s.book Seite 16 Montag, 28. November 2016 5:28 17
