Dometic RML 10.4S, Installation Manual

Page: 19 / 76

EN
RML10.4, RML10.4S, RML10.4T Installing the refrigerator
19
➤
Seal the installation frame to make the connection waterproof (fig.
0
, page 7).
➤
Insert the installation frame and screw it down tightly (fig.
a
, page 7). Use all the
fixing holes for this.
➤
Insert the ventilation grill as shown (fig.
b
, page 8).
5.5 Installing condensation drain
I
Install the condensation drain as follows:
Variant 1
➤
Run the condensation hose from the refrigerator through an opening in the floor
which goes outside under the vehicle.
Variant 2
➤
Attach the condensation hose directly to the fitting intended for it on the ventila-
tion grill (fig.
c
1, page 8).
3 Winter cover for the ventilation grill (accessories)
4 Slider
NOTE
• Condensation can form inside the refrigerator due to frequent door
opening, incorrectly stored food or food that is stored when it is too
warm.
• Condensation must be drained with a constant slope.
No. in
fig.
9
, page 7
Description
DometicRML10_INM_4445102838_EMEA(en-de-fr-nl)_xxxx-xx-xx.book Seite 19 Dienstag, 23. März 2021 3:17 15