EN
Using the appliance
PS120A, PS180A
10
➤
Extend the stands to the required length and lock them in position.
6.2
Connecting the solar panel
A
NOTICE!
•
Always observe the following connection sequence.
Overvoltage can damage the electronics of the device.
–
Connecting the solar panel
: Connect the Alligator clips to the
battery, then connect the Anderson plug to the solar panel,
finally connect the load.
–
Disconnecting the solar panel
: Disconnect the load first, then
disconnect the Anderson plug from the solar panel, finally dis-
connect the Alligator clips from the battery.
•
Ensure that the battery clamps do not get in contact with each other.
•
Only use the cable with Anderson plug and alligator clips supplied.
•
Make sure that the polarity is correct.
•
Make sure that the connection is tight and secure.
4
PS 120A
PS 180A
PS120SolarPanel-O-NZ.book Seite 10 Freitag, 6. Oktober 2017 10:53 10
