EN
Using the safe
proSafe
14
8.3
Emergency opening using R.E.O.S. (optional)
I
The remote emergency opening system (R.E.O.S.) gives a new four digit code in
case that the guest has forgotten the code used to close the safe.
Open the safe with R.E.O.S. code
➤
Press the
ENTER
button
twice
.
➤
Enter the six digit R.E.O.S. code.
I
➤
Press the
ENTER
button.
✓
After five seconds, a ten digit alphanumeric code will be shown on the display.
I
NOTE
•
You need access to the Internet to use R.E.O.S.
•
You must be registered on the internet at
www.sam.dometic.com
to be able to use the functions available
there.
•
The safe must be preconfigured accordingly to be able to use the
R.E.O.S. function. Please contact the manufacturer if you have any
questions (see back for addresses).
NOTE
You can change the factory-set R.E.O.S. code (210104) (see chapter
“Changing R.E.O.S. code” on page 16).
NOTE
The alphanumeric code will be shown in two parts.
Example:
52115 – Ab271
.
ENTER
ENTER
PIN 6X
ENTER
MD-IO-16s.book Seite 14 Freitag, 4. August 2017 9:25 09
